A dashcam hardwire kit is a small accessory that allows your dashcam to draw power directly from the vehicle’s fuse box instead of the 12V cigarette lighter socket. This type of setup provides a constant and reliable power source, making it possible for features such as parking monitoring to work even when the engine is off.
Hardwire kits usually include a voltage control module, a set of cables, and fuse adapters. The installation connects directly into the vehicle’s electrical system for a clean, professional finish.
The Three Wires Explained
Most hardwire kits, including Azdome’s, use three main cables:
1. Yellow (BAT+ or B+ or Battery)
This wire connects to a constant 12V fuse that has power even when the vehicle is off. It provides continuous power for parking mode and background recording.
2. Red (ACC or Ignition)
This connects to a fuse that is powered only when the ignition is turned on. It tells the dashcam when the vehicle is running so it can automatically switch between driving and parking modes.
3. Black (GND or Ground)
This wire must be connected to a clean, unpainted metal surface on the vehicle chassis. It completes the electrical circuit and ensures stable operation.
Why Use a Hardwire Kit
A hardwire kit adds both convenience and protection. The built-in voltage control module prevents the dashcam from draining your vehicle battery by cutting power when voltage drops below a safe level. It also frees up your 12V socket for other accessories and keeps your wiring hidden from view.
For Azdome dashcams, the three-wire hardwire kit typically supports both 12V and 24V systems and includes low-voltage cutoff options such as 12.4V, 12.0V, and 11.8V. The kit can also be used with other dashcam brands that use either mini or Type-C connectors.
If you would like your dashcam hardwired, CIEK Tech provides professional installation for both single and dual camera systems, ensuring the setup is safe, tidy, and ready for continuous protection.
